Micro-Motion Seesaw

Micro-Motion Seesaw.

5.6 cm x 4.5 cm x 5.5 cm,
installation depth 3.5 cm 

With full momentum upwards!

The NOCH "micro-motion Seesaw" awakens great childhood memories on the playground for everyone. Who doesn't like to remember the feeling of freedom when you swing full swing up and down the seesaw with your best friend. A nice day at the playground is a great experience for every child. Especially the seesaw makes every child happy, when you have to find the balance not to hang in the air and swing your friend upwards. No one wants to hang in the air and everyone fights to keep the opposite partner high up in the air. Bring great childhood days to your model layout with the "micro-motion children's seesaw" and provide a real eye-catcher when the children whoop full of verve in the air. A piece of playground equipment which, in addition to the children's carousel, the bird's nest swing, a slide, the sandbox and many other pieces of playground equipment, should not be missing from any children's playground.

Almost all of us probably have fond childhood memories of playgrounds and individual pieces of playground equipment. The swing on which our parents looked at us for hours; the children's carousel on which we always felt dizzy or the seesaw which was so difficult to balance. Playgrounds can be found in every town and village and are therefore an important part of human coexistence. Families meet, children play and laugh, parents talk about work and education, and many a person exchanges the latest gossip while their offspring swing peacefully. After last year's great success of the "tree with swing", we set about developing four pieces of moving playground equipment: a children's seesaw, a classic swing, a bird's nest swing and a children's carousel. The hand-painted playground equipment and figure models are fully assembled. Each device is driven by a motor located directly under the model (installation depth 35 mm). The mechanics for the drive are supplied as a kit. The supplied electronics are connected to a standard 16 V model railroad transformer and are suitable for direct and alternating current. The speed of the toy can be adjusted on the circuit board.

Note: The Laser-Cut kit comes with a matching Laser-Cut special glue.