chevron_left
chevron_right
1:87 H0n3
Växel, vänster, medium, längd 163 mm, unifrog
Växel, vänster, medium, längd 163 mm, unifrog
Bevaka artikel
-
Betala säkert i vår webshop!
Beskrivning
Växel, vänster, medium, längd 163 mm, unifrog.
'The UNIFROG design is a new development for PECO. In these turnouts the stock-rails are wired to the centre-rails at the factory, which in turn are connected to the corresponding frog-rail. This means that the turnout is completely live (except for the tip of the frog) with no extra wiring needed.
The frog tip and wing rails are connected, and have a wire attached underneath, allowing the modeller to switch polarity if they wish, through a micro-switch (PL-15) fixed to the turnout motor. Insulating joiners at the vee of the frog are not required. If the turnout is being used as a switch to isolate a section of track then it is a simple task to remove the wire that joins the centre-rail and stock-rail and it will work like a PECO Insulfrog turnout.'
'The UNIFROG design is a new development for PECO. In these turnouts the stock-rails are wired to the centre-rails at the factory, which in turn are connected to the corresponding frog-rail. This means that the turnout is completely live (except for the tip of the frog) with no extra wiring needed.
The frog tip and wing rails are connected, and have a wire attached underneath, allowing the modeller to switch polarity if they wish, through a micro-switch (PL-15) fixed to the turnout motor. Insulating joiners at the vee of the frog are not required. If the turnout is being used as a switch to isolate a section of track then it is a simple task to remove the wire that joins the centre-rail and stock-rail and it will work like a PECO Insulfrog turnout.'
Specifikation
- Skala
- 1:87 H0n3
2 andra produkter i samma kategori:
